Using Bathroom Tile Paint For A Simple Bathroom Renovation

If you are worried about the expense of retiling, then one option you can make is to paint your ceramic bathroom tiles. A bathroom tile paint is one of the simplest ways to undergo a bathroom makeover specifically for your floors. You can transform your dull and weary bathroom tiles with a new coat of paint and you will be surprised by how a seemingly straightforward project can accomplish a lot. However, cracked or chipped tiles may need to be replaced for the paint will not be able to hide its unsightly marks.

When it comes to applying bathroom tile paint, the job seems pretty easy following three simple steps. The first is preparation, wherein you need to thoroughly clean your tiles by using a good cleaning solution or specifically a tile and grout cleaning agent. It is best to use a non-abrasive scrubber to remove all dirt and grime as well as soap scum that has accumulated over the years. If your house is located in a hard water area, you may need to apply a calcium deposit remover for optimal results. Any spots and stains caused by mold or mildew must also be thoroughly cleaned using a solution that will also prevent its growth. For the grouting or the joints separating your tiles, you may use an old nailbrush or even a toothbrush especially for those hard to clean areas. Make sure that any repairs to be done in your grouting is done well in advance like 48 hours before the actual painting so as to give your tiles ample time to dry before you put on the primer coating. At this point, you must have done your measurements to determine how much paint materials you need to complete the task.

With bathroom tiles that are well cleaned and dry, you can commence with some gentle sanding of the glossy surface so that the bathroom tile paint will adhere to the material. You can use a very fine aluminum oxide paper to give a smooth finish minus the unpleasant marks or scratches typical of sanding. Make sure you have evenly sanded the surface of the tile then remove all the dust using a damp and lint free cloth, a brush or preferably a vacuum. At this point, you can begin applying a primer undercoat with care on making it even for all tiles. It is best to use a brush with synthetic hairs and employing vertical strokes. Avoid overloading the brush or you may not get an even coating. Make sure that as you paint each tile, you give it sufficient time to dry according to the specifications of the manufacturer. After your tiles are completely dried out, sand them again very gently and then dust them. You may repeat the same procedure for the succeeding coats.

Painting is the last of the three steps, which may be more particular for bathrooms experiencing high humidity. For these kinds of bathrooms, you can use a two part epoxy resin products that you can use as a substitute for your primer and bathroom tile paint. The end result is a long lasting smooth finish like what you find in porcelain. The only hitch is that this product is only available in limited colors. A good choice of color can be found in oil based gloss paint, which also produces a hard wearing and washable finish; the perfect solution to damp bathrooms. You can apply your gloss paints once your tiles have been primed with the use of a natural bristle brush and applying vertical strokes. Again, let it dry as instructed before you add the second coating, which is necessary for a more durable and beautiful finish. You can also paint the grout using a different shade by buying an artist’s brush for a more controlled stroke.

Related Articles